Drum Clamps

The AX-28 combines the 360-degree rotating clamp from the AX-25/25L with the fixed clamp of the ADP-20. Both clamps are quick release and adjust to fit tubing from 5/8" to 1-1/8".

In-Line and Revolving Clamps fits 5/8"~1-1/8" & 1/2"~1-1/8"

Learn More

X-Hat/L-rod Mounting System - Combines the mounting of a GI9707X auxiliary hat with an additional GSCPLRA Percussion L-rod Attachment. Learn More

JAW mounts microphone via drum hoop also works for guitar amp miking.

Learn More

Works with all L-Rods. Uses GSCLDML memory lock.
Hole Spacing 2" on center Learn More

Dixon Three Way Attachment Clamp with 9.5mm L-Rod

Learn More

Connects end of rack bar to another rack bar allowing for angle adjustment. Great for adding second bar to vertical upright or mounting vertical rack tube to T-leg with angle adjustment. Learn More

Cymbal tilter clamp.

Learn More

TAMA SINGLE TOM ATTACHMENT

Clamping this attachment on a 15.1mm to 28.6mm diameter pipe allows for direct set-up of toms. Even with a compact construction, the inclusion of the Omni-ball feature at the angle adjustment point lets you adjust toms to any angle.

FASTCLAMP EASY SET UP SYSTEM (US. PAT.NO.6096956)
Do you ever feel like you need three hands to attach a drum clamp?
Are you constantly frustrated by having to search the floor for dropped and scattered parts?
That's why TAMA's hardware designers came up with the FastClamp.

It really is as easy as 1-2-3.
1. Open the FastClamp just like a clothespin.
2. Close the FastClamp on the stand just like a clothespin.
3. The FastClamp holds the clamp in place so you can tighten the T-bolt.

You're all done! Who knows, you may even start to enjoy setting up your kit as much as you do playing it! Probably not, but if your kit requires a lot of clamps, set up will be a lot faster and easier with attachments that feature the FastClamp Easy Set-Up System.

Learn More

3/4-inch Dog Biscuit Clamp with 1/2-inch to 9.5mm L-Arm.

Learn More

Gibraltar's GSCGCSARA is designed to connect two 1-1/2" pipes together in-line with each other. The adjustable part of the clamp has a geared ratchet tilter that allows you to change the positioning of the clamp so that it angles the bar in a different direction. So if you don't want your bar mounted straight up, you can mount it off at an angle which opens up endless possibilities. This clamp works well when attaching cross bars to verticals and positioning at odd angles. Learn More