Live Sound

10-Channel Mixing Console: Max. 4 Mic / 10 Line Inputs (4 mono + 3 stereo) / 1 Stereo Bus / 1 AUX (incl. FX)

10-Channel Mixing Console
Max. 4 Mic / 10 Line Inputs (4 mono + 3 stereo)
1 Stereo Bus
1 AUX (incl. FX)
“D-PRE” mic preamps with an inverted Darlington circuit
1-Knob compressors
High-grade effects: SPX with 24 programs
24-bit / 192kHz 2in / 2out USB Audio functions
Works with the iPad (2 or later) through the Apple iPad Camera Connection Kit / Lightning to USB Camera Adapter
Includes Cubase AI DAW software download version
PAD switch on mono inputs
+48V phantom power
XLR balanced outputs
Metal chassis
Dimensions(W×H×D): 244 mm x 71 mm x 294 mm (9.6"x 2.8"x 11.6")
Net Weight: 2.1 kg (4.63 lbs.)

ALL-PURPOSE PROFESSIONAL DYNAMIC VOCAL MICROPHONE

The OM2 is a dynamic vocal microphone used for a wide variety of stage, home, and studio applications. This microphone has clear and accurate sound reproduction, resistance to feedback, and the ability to handle very high SPLs without distortion.

The OM2 vocal dynamic microphone utilizes a tight, uniform pattern which helps isolate vocals from the instruments on stage. With a Wide Frequency range of 50 Hz – 16 kHz, the OM2 employs a VLM™ diaphragm for a clear, precise sound with exceptional voice response.

Designed with slight bass proximity and a tailored mid-range, the OM2 Hypercardioid microphone has a full-bodied sound on small to mid-sized PA systems while retaining true sound on large or professional PA systems.

• Portable active 2-way full-range loudspeaker
• Built-in 6-channel mixer with 3-band EQ, reverb and delay
• Long battery life: up to 25h (ECO mode) / 5h (max. volume)
• 1x headset microphone with bodypack transmitter incl. AA batteries
• Bluetooth® 5.0 and stereo streaming (TWS) with two ANNYs
• Clear and distortion-free sound at maximum volume through DynX® DSP (Gen. 2)
• 2x microphone/line inputs for versatile connection options
• 1x stereo channel with 3.5mm jack (AUX) or RCA
• 1x receiver module slot for adding an additional ANNY wireless microphone
• Priority/ducking mode to emphasise the microphone signal
• Wheels and telescopic handle for easy transport
• 35-mm flange for use with a speaker stand
• USB-C port for charging a tablet or smartphone
• Footswitch input for hands-free effect control
• Integrated holder for tablet or smartphone

• 2-way passive 2 x 8” bass reflex PA speaker
• 400 watts RMS power handling
• 125 dB maximum SPL
• 2 x 8“ custom woofer and BMS compression driver
• BEM optimized HF waveguide for uniform coverage
• Birch ply cabinet with ultra rugged polyurea finish and M10 suspension points
• Shock-resistant front grill provides maximum speaker protection
• 36 mm Dual-Tilt pole receptacle for 0° or 5° mounting angles
• Large selection of smart installation and transport accessories

• True diversity UHF wireless system
• Shock-mounted dynamic and condenser microphone capsules
• Automatic channel scan
• Easy one-touch infrared frequency syncing
• Pilot tone squelch circuit prevents noise
• Switchable RF transmitter output (2, 10 or 30 mW)
• Rugged enclosures
• High-contrast OLED display

M1255B-S Shotgun

The M1255B is a Miniaturized condenser microphone with a fully integrated preamp, detachable cable, and is designed with very high sensitivity for distance miking. Applications include ceiling mount or table mount for conferencing, hanging choir miking, location recording, audience, or room miking. The M1255B has complete immunity from RF interference caused by cell phones and GSM devices. The M1255B is equipped with a Cardioid capsule and is also available with Hypercardioid, Omni, or Shotgun capsules. The microphone has the unique ability to be used in a wide variety of stage, studio, and broadcast applications. The M1255B is available with a wide array of clips and accessories for musical instruments, overhead stage miking, podiums, conferences, and presentations.

• Ideal for rental and event organisers
• Rugged, heavy-duty base with three M20 female threads for parallel use as a divider in Transflex cases
• Reinforcing sleeve for an stabalized base-to-pole connection
• 35 mm extension tube with M10 female thread
• Automatic LockPin®
• Maximum height: 2.4 meters