Live Sound

M1255BW-S White Shotgun

The M1255B is a Miniaturized condenser microphone with a fully integrated preamp, detachable cable, and is designed with very high sensitivity for distance miking. Applications include ceiling mount or table mount for conferencing, hanging choir miking, location recording, audience, or room miking. The M1255B has complete immunity from RF interference caused by cell phones and GSM devices. The M1255B is equipped with a Cardioid capsule and is also available with Hypercardioid, Omni, or Shotgun capsules. The microphone has the unique ability to be used in a wide variety of stage, studio, and broadcast applications. The M1255B is available with a wide array of clips and accessories for musical instruments, overhead stage miking, podiums, conferences, and presentations.

ALL-PURPOSE PROFESSIONAL DYNAMIC INSTRUMENT MICROPHONE

Designed with a Cardioid pickup pattern for isolation and feedback control, the i5 all-purpose dynamic instrument microphone is equipped with a VLM™ diaphragm for natural, accurate sound reproduction. The i5 is used for stage, studio, and broadcast applications and is able to handle SPLs in excess of 140 dB without distortion.

The i5 Cardioid microphone can be used to microphone a wide variety of musical instruments, guitars, and bass cabinets as well as vocals and speech. The i5 instrument microphone is sturdy, compact, and easy to position. With a Wide Frequency response of 50 Hz – 16 kHz, the i5 provides clear sound reproduction without having to rely on EQ.

• Active 12" 2-way bass-reflex PA speaker
• 131 dB max. SPL and 500-watt RMS performance with a highly-efficient digital amplifier
• Perfect all-rounder for full-range, satellite and monitor applications
• Practical presets for fast and user-specific frequency tuning
• Homogeneous dispersion pattern thanks to a BEM-optimised tweeter wave guide
• 12" custom woofer and BMS tweeter driver
• Distortion-free sound at even maximum volumes, thanks to DynX® DSP technology
• 2 line/mic input channels with individual gain controllers plus mono mix output
• 15 mm birch plywood housing with ultra-robust polyurea coating and M10 rigging points
• Shock-resistant front grille for optimal protection of the speaker.
• 36 mm dual tilt stand attachment with 0° and 5° tilt angle
• Extensive and smart accessories for installation and transport

• Compact high-performance stage monitor with top-of-the-range technologies
• Class-D power amplifier with 300 W RMS/1200 W peak and 127 dB max. SPL
• Coaxial design for true point source with a 1.75" titanium-diaphragm HF driver
• 12" woofer with 2.5" voice coil
• Optimised, practical radiation pattern due to 50° x 90° CD horn
• DynX® DSP (Gen.2) for distortion-free sound even at maximum volume
• 3-band EQ, Notch filter, 4 application presets and delay function
• PowerCON compatible loop-through professional power connection
• 35 mm speaker stand flange for FOH applications
• Durable Polyurea coating and heavy-duty front grille

The XS700 is the flagship of the XS series of power amplifiers and an absolute flyweight with just 1U and 3.4kg. Our Class D power amplifier technology makes it possible to pack high performance into a minimum of space without generating unnecessary loss energy. The power amp has an output of 350W per channel at 4 ohms, 2x 200W at 8 ohms, and 700W in bridged mode. It is conceived for all professional applications in which ease of transport and space is essential, whether mobile or in permanent installations.

The XS700 has all protection circuits against short-circuiting, DC, overheating, and overloading and has a soft-start delay.

The amplifier features XLR, RCA and jack input connectors, with Speakon-compatible sockets and screw terminals as outputs. On the rear panel, it is possible to select the mode of operation and gain and activate the limiter and ground-lift function. LEDs on the front indicate power, signal, clipping, triggering of the protection circuit, and the mode of operation. The XS700 impresses with operational dependability and a transmission range of 20Hz – 20kHz, which is reproduced transparently and dynamically with high impulse fidelity.

4-PIECE DRUM MICROPHONE PACKAGE

The DP4 is a perfect complement of dynamic microphones for close miking of a variety of sources on-stage or in the studio. Included in the DP4 microphone package are the D6, Audix’s flagship dynamic kick drum microphone, and three i5s, Audix’s best-selling instrument microphone. Also included are three DFLEX mic mounts for easy attachment to a wide variety of instruments. All microphones and clips are conveniently packaged in a foam-lined aluminum carrying case for travel and safekeeping when the microphones are not in use. The case also features three additional expansion slots for vocal microphones.

AFFORDABLE ALL-PURPOSE VOCAL MICROPHONE

The f50 multipurpose vocal dynamic microphone embodies a tight and uniformly controlled Cardioid polar pattern which assists in isolating the vocals from the instruments on stage. The f50 is also available with a noiseless, magnetic on/off switch (f50S).

Its warm, natural sound reproduction, resistance to feedback, and ability to handle high SPLs without distortion allows the f50 dynamic vocal microphone to be utilized in a variety of live and studio applications. The f50 Cardioid microphone is an entry-level, all-purpose vocal microphone for small to midsize PA systems.