You have no items in your shopping cart.
Info
The RØDE M3 is a highly versatile end-address condenser microphone, designed to be completely at home in the studio, on stage or on location. It is equally suitable as an instrument microphone for guitars, drums and percussion or even vocals.
...Read More
Heavy duty metal body
Internal capsule shock mount
High level of RF rejection
On-mic selectable high pass filter @ 80Hz-12dB/Oct (-10 and -20dB PAD)
Heat-treated high-strength mesh head
Battery status indicator
9V Battery Power, 24 or 48V Phantom Power
Includes wind shield, mic clip and zip pouch
Read Less
Internal capsule shock mount
High level of RF rejection
On-mic selectable high pass filter @ 80Hz-12dB/Oct (-10 and -20dB PAD)
Heat-treated high-strength mesh head
Battery status indicator
9V Battery Power, 24 or 48V Phantom Power
Includes wind shield, mic clip and zip pouch
The RØDE M3 is a highly versatile end-address condenser microphone, designed to be completely at home in the studio, on stage or on location. It is equally suitable as an instrument microphone for guitars, drums and percussion or even vocals. Featuring a heavy duty metal body and internally shock mounted 1/2" condenser capsule mounted for end-address, the M3 can be powered either via P48 phantom power, or an internal 9V battery. A -10dB and -20dB level attenuator (pad), selectable from inside the battery compartment, allows recording of loud sound sources, such as a guitar amplifier or snare drum. A high-pass filter selectable on the microphone power switch introduces a filter at 80Hz to reduce low frequency sounds and handling noise. The RØDE M3 microphone is designed and made in Australia, and covered by RØDE Microphones' industry leading 10 year warranty.
Read Less
Specs
Acoustic Principle - Pressure Gradient
Active Electronics - JFET impedance converter with bipolar output buffer
Capsule - 0.50"
Address Type - End
Frequency Range - 40Hz - 20kHz (selected HPF @80Hz)
Output Impedance - 200Ω
Maximum SPL - 142dBSPL
Maximum Output Level - 9.2mV (@ 1kHz, 1% THD into 1KΩ load)
Sensitivity - -40.0dB re 1 Volt/Pascal (6.30mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Equivalent Noise Level (A-weighted) - 21dBA
Weight - 390.00g
Dimensions - 225.00mmH x 33.00mmW x 33.00mmD
Active Electronics - JFET impedance converter with bipolar output buffer
Capsule - 0.50"
Address Type - End
Frequency Range - 40Hz - 20kHz (selected HPF @80Hz)
Output Impedance - 200Ω
Maximum SPL - 142dBSPL
Maximum Output Level - 9.2mV (@ 1kHz, 1% THD into 1KΩ load)
Sensitivity - -40.0dB re 1 Volt/Pascal (6.30mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Equivalent Noise Level (A-weighted) - 21dBA
Weight - 390.00g
Dimensions - 225.00mmH x 33.00mmW x 33.00mmD
